Founder, Dick Coronato
The Charlco Group is comprised of three companies, CHARL INDUSTRIES, FLUID MECHANISMS OF HAUPPAUGE INC. and SANTA FE MANUFACTURING. It is a unique family of machine tool companies that share the same resources and personnel to supply a diverse range of aerospace structural components and assemblies, flight safety assemblies and flight critical parts. Each company has a specific niche market and strong name recognition in their respective specializations while working within an approved AS9100 quality system. Established by Dick Coronato in 1972 all three companies are second generation owned and operated in one location in Hauppauge, NY (Long Island). Our machining capabilities include CNC 3 and 5 axis vertical high speed machining. The manufacturing envelope spans parts up to 160” x 42” x 24”. Parts with features requiring Horizontal Machining are also within our scope with a machining envelope of 24” x 24” x 24”. CNC Lathe capabilities may include parts with finished diameters from .250”-12”. Please visit the facilities tab for a complete listing. Over 50 years of CNC programming experience with CATIA V5, Mastercam and PCDMIS as our primary platforms for manufacturing and inspection.
NEWS & HIGHLIGHTS
Fluid Mechanisms receives "Performance Excellence Award-Silver Level"
Fluid Mechanisms is Honored to receive BOEING's "Performance Excellence Award-Silver Level" for the 7th time. The Fluid Mechanisms family has always strived to be a premier supplier and this award reflects that. Without all the hard work and dedication from all its employees this award would not be possible.
|
|
COVID 19 SAFETY PROTOCOLS
COVID-19 SAFETY
The Charlco Group adheres to all federal OSHA and state and local COVID-19 Health and Safety orders and regulations.
All requirements of this procedure shall be flowed down through our supplier base, as necessary per customer requirements.
All supplier personnel and visitors must comply with these COVID-19 safety procedures and protocols. Visitors have the right to refuse entry and/or leave if any of the requirements of this process have not been followed.
The Charlco Group will continue to minimize the time all visitors spend on-site by coordinating the Scope of Work to be performed on-site, and by gathering up all necessary documentary evidence needed to complete the assigned tasks of the visit.
Prior to any visit, The Charlco Group shall provide a point of contact and a copy of these safety procedures and protocols to all authorized visitors.
All employees and visitors are required to use face coverings consistent with federal OSHA and state and local orders and regulations.
All employees and visitors are required to adhere to physical distancing consistent with federal OSHA and state and local orders and regulations.
We will provide PPE as required. If PPE is not available, this shall be communicated to all visitors prior to the onsite visit.
Hand Sanitizer is available for all employees and visitors.
We will furnish, without additional charge, reasonable facilities, and assistance to ensure that visiting customer, supplier, and/or government representatives, can perform their duties in a safe and convenient manner.
This requirement may include, as necessary, an isolated work area in which to perform their assigned duties.
All work areas or equipment to be used by visiting personnel shall be cleaned and sanitized in advance of their arrival.
We have the ability to sanitize such work areas or equipment as necessary throughout the duration of their visit.
Contact Tracing
If The Charlco Group is made aware that a visitor has been in “close contact” with someone on our premises that has subsequently tested positive for COVID-19, we shall immediately notify the affected visitor(s). The same process shall be followed should we become aware that any company personnel or visitor has tested positive within two days prior to an upcoming onsite visit.
NOTE: Refer to the Centers for Disease Control (CDC) guidelines for clarification on contact.
Current guidelines define “close contact” as spending a cumulative total of fifteen minutes within six feet of an infected person, over the course of a 24-hour period, beginning two days before the onset of the illness.
The Charlco Group adheres to all federal OSHA and state and local COVID-19 Health and Safety orders and regulations.
All requirements of this procedure shall be flowed down through our supplier base, as necessary per customer requirements.
All supplier personnel and visitors must comply with these COVID-19 safety procedures and protocols. Visitors have the right to refuse entry and/or leave if any of the requirements of this process have not been followed.
The Charlco Group will continue to minimize the time all visitors spend on-site by coordinating the Scope of Work to be performed on-site, and by gathering up all necessary documentary evidence needed to complete the assigned tasks of the visit.
Prior to any visit, The Charlco Group shall provide a point of contact and a copy of these safety procedures and protocols to all authorized visitors.
All employees and visitors are required to use face coverings consistent with federal OSHA and state and local orders and regulations.
All employees and visitors are required to adhere to physical distancing consistent with federal OSHA and state and local orders and regulations.
We will provide PPE as required. If PPE is not available, this shall be communicated to all visitors prior to the onsite visit.
Hand Sanitizer is available for all employees and visitors.
We will furnish, without additional charge, reasonable facilities, and assistance to ensure that visiting customer, supplier, and/or government representatives, can perform their duties in a safe and convenient manner.
This requirement may include, as necessary, an isolated work area in which to perform their assigned duties.
All work areas or equipment to be used by visiting personnel shall be cleaned and sanitized in advance of their arrival.
We have the ability to sanitize such work areas or equipment as necessary throughout the duration of their visit.
Contact Tracing
If The Charlco Group is made aware that a visitor has been in “close contact” with someone on our premises that has subsequently tested positive for COVID-19, we shall immediately notify the affected visitor(s). The same process shall be followed should we become aware that any company personnel or visitor has tested positive within two days prior to an upcoming onsite visit.
NOTE: Refer to the Centers for Disease Control (CDC) guidelines for clarification on contact.
Current guidelines define “close contact” as spending a cumulative total of fifteen minutes within six feet of an infected person, over the course of a 24-hour period, beginning two days before the onset of the illness.
FLUID MECHANISMS
|
|
